Compressors are mainly used in industrial applications where the volumes
of gases have to be reduced for easier transportation. Compressors
increase the pressure of gases and at the same time reduces their
volume. Though most liquids are incompressible, others can be compressed
and easily transported. Atlas Copco specializes in manufacture of
compressors. From this firm, you will get compressors of different makes
and models. Each model has its own functions.
Atlas copco rotary screw compressor
This type of compressor that is used to separate gas and oil. Both its
exterior and exterior casing is made of a high-density glass fiber and
it has a flanged joint. It has a high dust holding capacity, its initial
pressure drop is low and most importantly it has a high infiltration
capacity. In addition, it is can easily be replaced or installed and it
is not susceptible to corrosion. It has an enhanced performance and it
is available in different filtrations.
Atlas copco rotary screw air compressor
This model is mainly used in factories to compress air. It is very
efficient in separating gas and oil. Its filtration system is also top
notch. When in use it produces low noise and it uses less power. Faults
that can occur from this compressor are also easily detected. This is
because it is equipped with a fault alarm indication system. It is
flexible, highly reliable, efficient and safe to use. A computer also
manages its control system. Therefore, it can automatically start and
stop.
Atlas Copco Bolaite Screw Air Compressor 200KW
This compressor model has double screws, it is simple to operate and it
can function properly in different mode conditions. It has an automatic
control and an alarm system that detects any slight hitch within the
system. This compressor is highly effective and its engine has a high
work rate. In addition, the compressor has an electric, motor, cooling,
oil duct and air course systems. These entire systems operate at
different temperature conditions.
25-70 cfm motor powered atlas copco screw air compressor A motor powers
this type of compressor and it has air and pressure delivery systems.
Its motor power ranges from 37 to 250 kW, as its working pressure ranges
from 0.7 mpa to 2 mpa. In addition, it as a capacity range of 4.8 to 35
meters cube per minute. This model is highly reliable and can operate
in different temperature conditions. The model has top class heavy duty
air inlet filters and drive systems. It also consumes less power
therefore maximizes energy savings. The motor drive system is computer
controlled making the compressor so efficient. Installing this type of
compressor is also easy.
Atlas Copco Screw Air Compressor Supplier This compressor produces low
oil free noise while operating, it has high pressure and it is portable.
It is mostly used to separate gas and oil and with its filtration
systems, the resultant oil is gas free. Its maintenance cost is low, a
factor that is contributed to by its external oil filtration systems.
Under harsh temperature conditions, this compressor is very reliable. It
has high oil filtration precision making its oil systems very clean.